STEALTH ACOUSTICS UNVEILS INVISIBLE IN-WALL SPEAKER
Stealth Acoustics announces the release of it`s next generation, invisible, inwall speaker system for home theaters, surround sound and whole house audio systems.
New Product Release
Model: 228 Series 2 – Invisible Flat Panel In-Wall Speaker
MSRP: $625.00 per pair
Product Description
The Stealth Acoustics 228 Series 2 is an in-wall flat panel speaker system that becomes invisible when installed. The panel measures 16 by 22 inches and mounts directly to the structural framing, replacing the wall board. The panel has an active area that moves and is surrounded by a solid mounting frame. The panel is secured to the mounting frame, and the drywall is bonded to the panel to create a seamless transition. The unique construction of this panel allows for installation in walls and ceilings with framing members spaced as narrow as 9-1/2`. The surface on the face of the panel is designed to be painted with latex based products. Light texture or wallpaper can also be applied.
The active area of the panel is powered by a hybrid system combining a direct radiating transducer for the high frequencies with a conventional 8` woofer for the low frequencies. Both devices are built to stand the test of time and are protected well below their maximum operating levels from excessive power input.
Specifications
Nominal Impedance: 8 ohms
Power Handling: 80 watts
Crossover Frequency: 1200Hz
High Frequency Driver: NXT Steered Flux Exciter
Low Frequency Driver: 8` with 1.5` diameter voice coil with rubber surround.
Sensitivity: 87db
Frequency Response: 35Hz – 15kHz, -4db
(Installation parameters will affect frequency response)
Excess power protection provided for both drivers.
Dimensions: 15-7/8` x 22`
Shipping Weight (2 Units): 33lbs.
For more information contact Allwired Technologies
